Hengshui Factory Welded Wire Iron Mesh  Galvanized Welded Wire Mesh

Welded wire mesh

Welded wire mesh is built with two orthogonal wires that are joined jointly at their intersections employing a resistance welding procedure to sort a grid. The line wires of the grid are guided via the welder using a pattern board. The equipment drops cross wires into spot and fuses them collectively to produce the two distinctive planes that type welded wire mesh.

Line wires (also known as long wires) are laid out on a pattern board to set the panel width spacing. Cross wires are fed into a hopper, and are programmed to be dropped one at a time on to the line wires. Then, the cross wires are resistance welded into spot location the panel duration spacing. The panel advances right after the weld and the process begins in excess of once again.

Welded Wire Spacing
Welded wire mesh spacing can be expressed by measuring from the center of two wires (Center to Heart) or by measuring the opening between two wires (Clear Opening). We can manufacture normal and custom made welded wire mesh with a square mesh spacing variety from 1″ to as big as may be essential.  Rectangular mesh spacing ranges from one/2″ x up to as lengthy as may be necessary.

Edge Situations
 Welded Wire Mesh has two regular edge problems: trimmed and untrimmed.

Depth specification:
Content: reduced carbon steel wire, galvanized wire ,stainless steel wire
Area working : black welded wire mesh,
electro galvanized before welded wire mesh,
Electro galvanized right after welded wire mesh
scorching-dipped galvanized prior to welded wire mesh
Very hot-dipped galvanized right after welding wire mesh
PVC-coated welded wire mesh
Electrical power coated welded wire mesh
Wire diameter: .45mm to twelve.0mm
Hole size: one/three” to one hundred fifty mm gap
Hole shape: square gap, rectangular gap
Width: .3M to 2.0M
Packing : in roll or in panel

please notice, we can weave speical wire diameter welded wire mesh this sort of as one/4″X1.1mm, one/2″X1.4mm and so on on your requirement 

Welded wire mesh Specification:

Open up in inch Opening in (mm) Wire diameter
1/four” x one/four”
six.4mm x 6.4mm
3/eight” x 3/8″
ten.6mm x ten.6mm
one/2″ x 1/two”
12.7mm x twelve.7mm
5/8″ x five/8″
16mm x 16mm
three/4″ x three/4″
19.1mm x 19.1mm
1″ x one/2″
25.4mm x twelve.7mm
twenty five.4mmX25.4mm
one-one/2″ x 1-1/2″
38mm x 38mm
one” x 2″
twenty five.4mm x 50.8mm
2″ x two”
fifty.8mm x fifty.8mm
2″ x three”
50mm x 75mm
3″ x 3″
75mm x 75mm
two” x 4″
50mm x 100mm
2.11mm,two.5mm, three.0mm, 4.0mm
four” x 4″
100mm x 100mm
two.0mm,two.5mm, three.0mm, 4.0mm
CZPT Be aware:
1,CZPT roll size:20- 30mwidth: .5m to one.8m
two,Particular sizes CZPT at ask for
3,Packing: in water-proof paper in rolls. CZPT packing CZPT at ask for.


Hengshui Factory Welded Wire Iron Mesh  Galvanized Welded Wire Mesh