Item Description

HDPE Compression Fittings, PP compression fittings, HDPE Compression ninety diploma elbow, Compression elbow, Poly Compression elbow, Compression elbow fittings, HDPE compression elbow, PP Compression elbow

HDPE compression 90 diploma elbow fitting is used to join 2 lengths of metric HDPE pipe in an L form at ninety degree angle.

PP compression elbow fittings can be made in a diameter sizing from 20mm to 110mm, with pressures up to 16 bar. The HDPE compression elbow fittings are created from large top quality PP-B content that is resistant to etching by several chemical substances, and to UV rays, and are suited for outside use.

The range of CZPT compression fittings are for use with substantial-density polyethylene pipes dedicated to fluid reticulation. They can be utilised in irrigation, ingesting water methods and incorporate numerous products suited for a really broad range of plant engineering set up requirements. The measurements range from 20mm to 110mm. All fittings with a woman threaded portion of 32mm or better are bolstered externally with a stainless metal ring.

 
 
PP compression elbow fittings are consisted of 5 plastic add-ons: 

Mark Component Identify Substance Coloration
A Cap Higher good quality polypropylene black co-polymer (PP-B) Blue
B Clinching Ring POM resin White
C Blocking Bush High high quality polypropylene black co-polymer (PP-B) Black
D “O” Ring Gasket NBR rubber Black
E Body Higher high quality polypropylene black co-polymer (PP-B) Black

A lot more quick information as below:

Solution  HDPE Compression 90 diploma elbow, Compression elbow, Poly Compression elbow, Compression elbow fittings, HDPE compression elbow, PP Compression elbow
Specification   20mm to 110mm
Stress ratings  Doing work Stress at 20ºC:
20~63mm in PN16 75~110mm in PN10
Material Large good quality polypropylene black co-polymer (PP-B)
Colour Black physique / Blue Cap
Manufacturing Common Dimensions and characteristics:  ISO 3501/3503/3458/3459.
To be installed on HDPE pipes: ISO 11922 DIN 8072/8074       
Threads (BSP): ISO 7 DIN 2999.
Samples available  Sure, samples are obtainable, but billed.
Packing method  Cartons
MOQ  Negotiable
Personalized Logo offered
(OEM Support)
For little amount of purchase, customer emblem can be marked on the fittings by laser marking or sticker.
For big quantity of buy, customer emblem can be embossed on the fittings.
Creation guide time  Mass stock offered for regular dimensions
About ten days for a 20ft container, twenty days for a 40ft container
Guarantee time  1 years for standard use 
Payment term  T/T, L/C, DP, Western Union, or negotiable 
FOB loading port  HangZhou/ZheJiang China 
Location of origin  HangZhou, China 

Merchandise Specifications  
HDPE/PP compression elbow fittings can be created sizing from 20mm to 110mm. The dimensions twenty-63mm with a stress of PN16, and 75-110mm pressurized in PN10.   

  

Dimension
(mm)
Pressure Score
(bar)
Excess weight
(gram/PCS)
Packing
(PCS/CTN)
20 PN16 76 240
25 PN16 one hundred fifteen one hundred forty
32 PN16 173 96
40 PN16 310 fifty one
fifty PN16 531 30
sixty three PN16 907 sixteen
75 PN10 1202 nine
ninety PN10 1636 6
a hundred and ten PN10 2910 three

 

Applicants of HDPE Compression fittings
The selection of poly pipe compression fittings are for use with substantial density polyethylene pipes committed to fluid reticulation. They can be used in irrigation, ingesting h2o systems, valves and substantial pressure lines for drinking water, gasoline and other fluids, and numerous products ideal for a really wide variety of plant engineering set up requirements.

• Watering: Residential, municipal, activity fields, golf classes.
• Irrigation: Agriculture, horticulture, vineyards.
• Market: Compressed air.

 Installation method For HDPE Compression Fittings
HDPE Pipe Compression fittings provide a a effortless & simple set up for HDPE pipe without welding. It allows signing up for of pipe in a few effortless methods. Merely minimize, chamfer and clean the pipe, loosen the compression nut on the fitting, insert the pipe into the fitting till it bottoms out, and mechanically tighten the nut. When appropriately accomplished, your new relationship is instantly prepared for force.

one. Pipe ends need to be cut sq. and burr-free of charge before utilizing with the fittings. Chamfer
might be supplied on the pipe end to aid ease of pipe insertion.
two. No need to open fitting & take apart factors independently. Just loosen the QJN
(Rapid Joint Nut) by 3 to 4 turns.
three. Insert the pipe into the fitting up to the stopper.
four. Hand Tighten the QJN for fittings up to 32 mm.
5. Use Wrench to tighten the QJN soon after hand tightening for fittings forty mm and earlier mentioned.
six. Right after Organization Hand Tightening, Tighten the QJN with wrench only for a quarter turn.
High quality Management
To ensure the HDPE compression fittings fulfill the maximum good quality level as for every regular, CZPT fundamentally adopts the top good quality CZPT uncooked components from effectively-recognized manufacturers. All incoming raw materials shall be examined as qualification when it comes to our factory.

SUNPLAST has been strictly executing the top quality technique of ISO9001:2000, and every piece of fittings have to move our strict inner good quality handle just before it is introduced to our buyers. The entire creation training course are controlled by ISO 9001 quality assurance system.We guarantee that every materials for merchandise is inspected on assortment.Besides,every single batch is sampled for inspection in order that the manufacturing unit p.c of move can achieve a hundred%

Tests on finished item:
– Watertightness with inner hydrostatic strain
with no axial energy (EN-714).
– Pressure watertightness with outer hydrostatic
force (EN-911)
– Pull out resistance check (EN-712)
– Interior strain check with “bending” (EN-713)
– Test of insertion of pipes in o-ring.
Speak to Us
If you have any specifications on PP compression fittings, or any concern on our fittings, please speak to us freely. CZPT has nicely skilled staff who are obtainable to address your requirements and offer specialized assist to all sectors when needed.
 

To Be Negotiated 200 Pieces
(Min. Order)

###

Material: PP
Connection: Press Connection
Transport Package: Cartons
Specification: 20-110
Trademark: SUNPLAST OR OEM
Origin: China

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Mark Part Name Material Color
A Cap High quality polypropylene black co-polymer (PP-B) Blue
B Clinching Ring POM resin White
C Blocking Bush High quality polypropylene black co-polymer (PP-B) Black
D "O" Ring Gasket NBR rubber Black
E Body High quality polypropylene black co-polymer (PP-B) Black

###

Product  HDPE Compression 90 degree elbow, Compression elbow, Poly Compression elbow, Compression elbow fittings, HDPE compression elbow, PP Compression elbow
Specification   20mm to 110mm
Pressure ratings  Working Pressure at 20ºC:
20~63mm in PN16; 75~110mm in PN10
Material High quality polypropylene black co-polymer (PP-B)
Color Black body / Blue Cap
Manufacturing Standard Dimensions and characteristics:  ISO 3501/3503/3458/3459.
To be installed on HDPE pipes: ISO 11922; DIN 8072/8074;       
Threads (BSP): ISO 7; DIN 2999.
Samples available  Yes, samples are available, but charged.
Packing method  Cartons
MOQ  Negotiable
Customized Logo available
(OEM Service)
For small quantity of order, customer logo can be marked on the fittings by laser marking or sticker.
For big quantity of order, customer logo can be embossed on the fittings.
Production lead time  Mass stock available for regular sizes
About 10 days for a 20ft container, 20 days for a 40ft container
Warranty time  1 years for normal use 
Payment term  T/T, L/C, DP, Western Union, or negotiable 
FOB loading port  Ningbo/Shanghai China 
Place of origin  Ningbo, China 

###

Size
(mm)
Pressure Rating
(bar)
Weight
(gram/PCS)
Packing
(PCS/CTN)
20 PN16 76 240
25 PN16 115 140
32 PN16 173 96
40 PN16 310 51
50 PN16 531 30
63 PN16 907 16
75 PN10 1202 9
90 PN10 1636 6
110 PN10 2910 3
To Be Negotiated 200 Pieces
(Min. Order)

###

Material: PP
Connection: Press Connection
Transport Package: Cartons
Specification: 20-110
Trademark: SUNPLAST OR OEM
Origin: China

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Mark Part Name Material Color
A Cap High quality polypropylene black co-polymer (PP-B) Blue
B Clinching Ring POM resin White
C Blocking Bush High quality polypropylene black co-polymer (PP-B) Black
D "O" Ring Gasket NBR rubber Black
E Body High quality polypropylene black co-polymer (PP-B) Black

###

Product  HDPE Compression 90 degree elbow, Compression elbow, Poly Compression elbow, Compression elbow fittings, HDPE compression elbow, PP Compression elbow
Specification   20mm to 110mm
Pressure ratings  Working Pressure at 20ºC:
20~63mm in PN16; 75~110mm in PN10
Material High quality polypropylene black co-polymer (PP-B)
Color Black body / Blue Cap
Manufacturing Standard Dimensions and characteristics:  ISO 3501/3503/3458/3459.
To be installed on HDPE pipes: ISO 11922; DIN 8072/8074;       
Threads (BSP): ISO 7; DIN 2999.
Samples available  Yes, samples are available, but charged.
Packing method  Cartons
MOQ  Negotiable
Customized Logo available
(OEM Service)
For small quantity of order, customer logo can be marked on the fittings by laser marking or sticker.
For big quantity of order, customer logo can be embossed on the fittings.
Production lead time  Mass stock available for regular sizes
About 10 days for a 20ft container, 20 days for a 40ft container
Warranty time  1 years for normal use 
Payment term  T/T, L/C, DP, Western Union, or negotiable 
FOB loading port  Ningbo/Shanghai China 
Place of origin  Ningbo, China 

###

Size
(mm)
Pressure Rating
(bar)
Weight
(gram/PCS)
Packing
(PCS/CTN)
20 PN16 76 240
25 PN16 115 140
32 PN16 173 96
40 PN16 310 51
50 PN16 531 30
63 PN16 907 16
75 PN10 1202 9
90 PN10 1636 6
110 PN10 2910 3

Types of Couplings

A coupling is a device used to join two shafts together and transmit power. Its purpose is to join rotating equipment while permitting a degree of end movement and misalignment. There are many types of couplings, and it is important to choose the right one for your application. Here are a few examples of couplings.

Mechanical

The mechanical coupling is an important component in power transmission systems. These couplings come in various forms and can be used in different types of applications. They can be flexible or rigid and operate in compression or shear. In some cases, they are permanently attached to the shaft, while in other cases, they are removable for service.
The simplest type of mechanical coupling is the sleeve coupling. It consists of a cylindrical sleeve with an internal diameter equal to the diameter of the shafts. The sleeve is connected to the shafts by a key that restricts their relative motion and prevents slippage. A few sleeve couplings also have threaded holes to prevent axial movement. This type of coupling is typically used for medium to light-duty torque.
Another type of mechanical coupling is a jaw coupling. It is used in motion control and general low-power transmission applications. This type of coupling does not require lubrication and is capable of accommodating angular misalignment. Unlike other types of couplings, the jaw coupling uses two hubs with intermeshing jaws. The jaw coupling’s spider is typically made of copper alloys. In addition, it is suitable for shock and vibration loads.
Mechanical couplings can be made from a variety of materials. One popular choice is rubber. The material can be natural or chloroprene. These materials are flexible and can tolerate slight misalignment.
gearbox

Electrical

Electrical coupling is the process in which a single electrical signal is transferred from a nerve cell to another. It occurs when electrical signals from two nerve cells interact with each other in a way similar to haptic transmission. This type of coupling can occur on its own or in combination with electrotonic coupling in gap junctions.
Electrical coupling is often associated with oscillatory behavior of neurons. The mechanism of electrical coupling is complex and is studied mathematically to understand its effect on oscillatory neuron networks. For example, electrical coupling can increase or decrease the frequency of an oscillator, depending on the state of the neuron coupled to it.
The site of coupling is usually the junction of opposing cell membranes. The cellular resistance and the coupling resistance are measured in voltage-clamp experiments. This type of coupling has a specific resistance of 100 O-cm. As a result, the coupling resistance varies with the frequency.
The authors of this study noted that electrotonic coupling depends on the ratio between the resistance of the nonjunctional membranes and the junctional membranes. The voltage attenuation technique helps reveal the differences in resistance and shunting through the intercellular medium. However, it is unclear whether electrotonic coupling is electrostatically mediated.
Electrical coupling has also been suggested to play a role in the intercellular transfer of information. There are many examples that support this theory. A message can be a distinct qualitative or quantitative signal, which results in a gradient in the cells. Although gap junctions are absent at many embryonic interaction sites, increasing evidence suggests a role in information transfer.

Flexible

When it comes to choosing the right Flexible Coupling, there are several factors that you should take into account. Among these factors is the backlash that can be caused by the movement of the coupling. The reason for this problem is the fact that couplings that do not have anti-fungal properties can be easily infected by mold. The best way to avoid this is to pay attention to the moisture content of the area where you are installing the coupling. By following these guidelines, you can ensure the best possible installation.
To ensure that you are getting the most out of your flexible couplings, you must consider their characteristics and how easy they are to install, assemble, and maintain. You should also look for elements that are field-replaceable. Another important factor is the coupling’s torsional rigidity. It should also be able to handle reactionary loads caused by misalignment.
Flexible couplings come in many different types. There are diaphragm and spiral couplings. These couplings allow for axial motion, angular misalignment, and parallel offset. They have one-piece construction and are made from stainless steel or aluminum. These couplings also offer high torsional stiffness, which is beneficial for applications requiring high torques.
Flexible couplings have several advantages over their rigid counterparts. They are designed to handle misalignments of up to seven degrees and 0.025 inches. These characteristics are important in motion control applications. Flexible couplings are also inexpensive, and they do not require maintenance.
gearbox

Beam

A beam coupling is a type of mechanical coupling, usually one solid piece, that connects two mechanical parts. Its performance is largely determined by the material used. Typical materials include stainless steel, aluminum, Delrin, and titanium. The beam coupling is rated for different speeds and torques. The coupling should be selected according to the application. In addition to the material, the application should also consider the speed and torque of the system.
There are two main types of beam couplings. The first is the helical beam coupling, which has a continuous multi spiral cut. This type of coupling offers a high degree of flexibility and compensates for a high degree of misalignment. The second type of beam coupling is the helical shaft coupling, which has a low torsional stiffness, which makes it ideal for small torque applications.
Another type of beam coupling is the multiple beam design, which combines two beams. It allows for more tolerance in manufacturing and installation and protects expensive components from excessive bearing loads. It also helps keep beams shorter than a single beam coupling. This type of coupling also enables a higher torque capacity and torsional stiffness.
Beam couplings can be manufactured with different materials, including stainless steel and aluminum. The “A” series is available in aluminum and stainless steel and is ideal for general-purpose and light-duty applications. It is also economical and durable. This type of coupling can also be used with low torque pumps or encoder/resolver systems.

Pin & bush

The Pin & bush coupling is a versatile, general-purpose coupling with high tensile bolts and rubber bushes. It can tolerate a wide range of operating temperatures and is suitable for use in oil and water-resistance applications. Its unique design enables it to be used in either direction. In addition, it requires no lubrication.
The pin bush coupling is a fail-safe coupling with a long service life and is used for high-torque applications. It provides torsional flexibility and dampens shocks, making it a flexible coupling that protects equipment and reduces maintenance costs. Its hubs are forged from graded cast iron for strength and durability. Besides, the coupling’s elastomer elements reduce vibration and impact loads. It also accommodates a misalignment of up to 0.5 degrees.
Pin & bush couplings are a popular choice for a variety of different applications. This coupling features a protective flange design that protects the coupling flange from wear and tear. The coupling nut is secured to one flange, while a rubber or leather bush sits between the other flange. Its unique design makes it ideal for use in applications where misalignment is a small factor. The rubber bushing also helps absorb vibration and shock.
gearbox

Mesh tooth

Mesh tooth couplings are used to transfer torque between two shafts and reduce backlash. However, mesh tooth couplings have some limitations. One disadvantage is the break-away friction factor in the axial direction. This problem is caused by the high contact force between the tooth and gear mesh. This can cause unpredictable forces on the shafts.
In this paper, we present a FEM model for mesh tooth coupling. We first validate the mesh density. To do so, we compute the bolt stress as a uniaxial tensile during the tightening process. We used different mesh sizes and mesh density to validate our results.
The mesh stiffness of gear pairs is influenced by lead crown relief and misalignment. For example, if one tooth is positioned too far in the axis, the mesh stiffness will be decreased. A misaligned gear pair will lose torque capacity. A mesh tooth coupling can be lubricated with oil.
An ideal mesh tooth coupling has no gaps between the teeth, which reduces the risk of uneven wear. The coupling’s quality exposed fasteners include SAE Grade 5 bolts. It also offers corrosion resistance. The couplings are compatible with industrial environments. They also eliminate the need for selective assembly in sleeve couplings.
China Professional Supply Germany Standard Pn16 PP Compression Fittings Coupling Reducing Coupling for Irrigation     a  coupling reactionChina Professional Supply Germany Standard Pn16 PP Compression Fittings Coupling Reducing Coupling for Irrigation     a  coupling reaction
editor by czh 2022-12-16